V92TC V92TC DELUXE - Polaris
V92TC V92TC DELUXE - Polaris
V92TC V92TC DELUXE - Polaris
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pre-Operation Check<br />
WARNING<br />
Do not operate the motorcycle with the oil level above the FULL mark or below the ADD mark.<br />
Operating the engine with too much or too little oil can cause serious engine damage or engine<br />
seizure, resulting in you losing control of the motorcycle.<br />
Fuel<br />
Check Fuel Level<br />
1. Straddle the motorcycle on level ground and bring it to a vertical position.<br />
2. Turn the ignition switch to the On position and press the multi -function display (MFD) Mode button<br />
until the fuel gauge appears in the MFD.<br />
3. Note the fuel level.<br />
4. Estimate your next fuel stop and plan accordingly.<br />
Check Fuel Hose, Rail, and Connections<br />
Inspect the fuel hoses for cracks or damage. Inspect the hose connection at the fuel tank and at the fuel rail for<br />
dampness or stains from leaking or dried fuel.<br />
Check Evaporative Emission Control System (California model only)<br />
Visually inspect all evaporative emission control system hoses and connections. Make sure all connections are<br />
tight. Also, inspect the evaporative canister to make sure it has not been damaged.<br />
48