NetApp and VMware vSphere Storage Best Practices

MANUALLY SETTING THE PSP FOR A LUN
An alternative method for setting the preferred path for multiple LUNs is available in vCenter Server. To set
the path, follow these steps.
1 Open vCenter Server.
2 Select an ESX Server.
3 In the right pane, select the Configuration tab.
4 In the Hardware box, select Storage Adapters.
5 In the Storage Adapters pane, select a host bus adapter.
6 Highlight all of the LUNs to configure.
7 Right-click the highlighted LUNs and select Manage Paths (see Figure 22).
8
In the Manage Paths window, set the multipathing policy and preferred path for all of the
highlighted LUNs (see Figure 23).
Figure 22) Selecting a SCSI target to manage its paths.
33