04 - Laboratory Automation Hardware - HiTec Zang GmbH
04 - Laboratory Automation Hardware - HiTec Zang GmbH
04 - Laboratory Automation Hardware - HiTec Zang GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
18<br />
<strong>Laboratory</strong> <strong>Automation</strong> <strong>Hardware</strong><br />
LabManager Complete System (LK-LABMAN1K)<br />
This complete system is particularly suited for the<br />
automation of lab reactor plants of medium<br />
complexity.<br />
Equipment of the PI:<br />
� 8 Pt100 inputs (-200 °C ... +600 °C)<br />
� 8 analogue inputs (0/4...20 mA or -10...+10 V) for<br />
the connection of analogue sensors for pressure,<br />
flow etc. and devices with analogue output as pH<br />
meters, thermostats etc.<br />
� 8 analogue outputs (0/4...20 mA or -10...+10 V)<br />
For connecting devices with analogue input as<br />
stirrer, thermostat, dosing pump etc.<br />
� 8 digital inputs (binary and frequency) for the<br />
connection of binary sensors such as filling level<br />
monitor, pressure regulators or status or alarm<br />
outputs of devices<br />
� 8 active digital outputs (24V, binary, PWM and<br />
PFM) For connecting binary actuators such as<br />
magnetic valves, heating, pumps, etc.<br />
� 2 RS232 serial interfaces for the connection of<br />
scales, devices and analysers with serial<br />
interface<br />
� Integrated sensor and actuator power supply<br />
� A free panel place for retrofitting<br />
Equipment of the UI:<br />
� State-of-the-art processor *<br />
� 1 GB RAM<br />
� Uninterrupted power supply (UPS)<br />
� UPS management system<br />
� Pre-installed Windows XP or Windows Vista<br />
* The equipment is regularly adapted to the current standard.<br />
The system consists of the following components:<br />
The UI can optionally be supplied in a desktop,<br />
tower or mini tower case and with modified<br />
equipment (see chapter Display and operating<br />
Components). The software is installed and readyto-use.<br />
The LabVision software update service is<br />
available for one year free of charge.<br />
The system can be updated with additional modules<br />
such as IEC 61131 I control module (SF-AWL, SF-<br />
AWLPLUS), adaptive automatic controllers (SF-<br />
HICON), NAMUR interface driver for serial<br />
interfaces (SF-NAMSERxx) etc..<br />
The free panel place can be equipped according to<br />
your requirements, for example with a thermocouple<br />
panel (LP-THP8 + interface card), a measurement<br />
module for load cells (HK-GRADOMS...) or a high<br />
precision temperature measurement module (HK-<br />
AD24PX8).<br />
Amount Order Code Description<br />
1 LG-LABMAN1 LabManager1 standard device, for equipment see LG-Labman1<br />
1 CG-ABK1 <strong>HiTec</strong> display and operating components with uninterrupted power supply and<br />
USV management, for equipment see UI1<br />
1 CP-M20TFTWS 20 Inch Widescreen TFT Monitor<br />
Delivery Scope Ready to use system (excl. LabVision software), LabManager1, UI with monitor<br />
and UPS, UI / PI cable, 230 V cable, manual<br />
Order Code Description<br />
LK-LABMAN1K Complete system with LabManager1<br />
Suitable software packages (alternative):<br />
Order Code Description<br />
SL-LABVIPBAT Software package for LabManager1 for running medium sized batch processes<br />
SL-LABVIPKON Software package for LabManager1 for running medium sized continuous-processes<br />
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the <strong>Laboratory</strong> Reactor