04 - Laboratory Automation Hardware - HiTec Zang GmbH

20
Laboratory Automation Hardware
LabBox2 standard device (LG-LABBOX2)
This standard device, amongst other applications, is
particularly suited for the automation of lab reactor
plants of medium complexity
Equipment:
� 8 Pt100 inputs (-200 °C ... +600° C)
� 8 analogue inputs (0/4...20 mA or -10...+10 V) for
the connection of analogue sensors for pressure,
flow etc. and devices with analogue output such
as pH meters, thermostats etc.
� 8 analogue outputs (0/4...20 mA or -10...+10 V)
For connecting devices with analogue input such
as stirrer, thermostat, dosing pump etc.
� 8 digital outputs (24 V, binary, PWM and PFM)
For connecting binary actuators such as
magnetic valves, heating, pumps, etc.
� Integrated sensor and actuator power supply
� 2 serial RS232 interface modules for the
All panel places of the device are assigned.
The device can be upgraded with additional modules
such as an IEC 61131 I control module (SF-AWL,
SF-AWLPLUS), adaptive automatic controller (SF-
HICON), NAMUR interface driver for serial
interfaces (SF-NAMSERxx) as well as two more
serial interfaces.
connection of balances, devices and analysers
with serial interface
For technical data, see LB-LABBOX2B.
The standard device consists of the following components:
Amount Order Code Description
1 LB-LABBOX2B LabBox basic device
1 HK-AD20NMUX16 Analogue/digital 20 bit converter card resolution, 16 channel multiplexer
1 LP-AEP8A Connection panel/board with 8 0/4..20 mA current or 10 V..+10 V voltage
inputs, integrated sensor
1 LP-PTP8 NAMUR compliant interface panel for 8 Pt100 in two to four conductor
technology
1 HK-DA812UI D/A 8 x 12 bit converter card, for analogue output -10 ... 10 V or 0/4...20 mA
1 LP-AAP8UI Interface panel for eightfold analogue output with current outputs (0/4...20
mA) and voltage outputs (-10..+10 V)
1 HK-DEA16N digital input/output card with 2 x 8 inputs and 2 x 8 outputs.
1 LP-DAP8A Interface panel with 8 digital outputs, 24V relays change-over contact, max. 3
A resilient, 3 A power supply (short-circuit -proof)
1 HK-SER8ECB additional serial card SER8ECB for the serial interface
1 HS-NGS243 DC supply 24 V / 3 A calendared for actuators.
1 HS-NGS241A DC supply 24 V / 1.5 A calendared for sensors.
2 HD-RS2329L 9-pin RS232 interface
Delivery Scope LabBox2, UI / PI cable, power supply cable, manual
Order Code Description
LG-LABBOX2-1 LabBox2 standard device 1 with DE4DA4PA
Instead of the LP-DE4DA4PA panel, a panel
LP-DAP8A with 8 digital outputs can be equipped.
Order Code Description
LG-LABBOX2-2 LabBox2 standard device 2 with LP-DAP8A
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the Laboratory Reactor