04 - Laboratory Automation Hardware - HiTec Zang GmbH

46
Laboratory Automation Hardware
8 active digital outputs (LP-DAP8A)
This panel offers at each
connection a normally open and
normally closed contact with an
active switch voltage of 24 V for
direct activation of actuators. For
power supply, depending on the
Up to two LP-DAP8A can be
connected to a HK-DEA16N or
HK-DEA16n card.
� 8 active digital outputs,
changeover switch, 24 V, a
maximum of 1 A, on a 3 pin tuchel plug, max 3
A
� Short-circuit proof
� Control LED for every channel
� For the direct connection of magnetic valves,
drives, heating, dosing pumps, etc..
Technical Data
Connection example for magnetic valves
Signal Active change-over switch (normally open contact +24 V, normally closed contact
+24 V), capable of bearing 1 A
Connection type 3 pin plugs, DIN41524
Usable with HK-DEA16N, HS-NGS241A to HS-NGS248
For connecting 24 V consumers as magnetic valves, engine valves, reflux divisors, motors, digital
control inputs on devices etc.
Delivery Scope Panel with holding bolts, cable for internal connection
Order Code Description
LP-DAP8A Digital output interface panel, active outputs
LZ-AKTUS Caps for tuchel plugs
For suitable connecting cables for valves, actuators etc., see "Cable for Instrumentation“.
8 Active Outputs for high Switching Frequencies (LP-DAP8T)
This panel allows the direct
connection of proportional
magnetic valves. Because of the
high switching frequency of up to
1 kHz, MOSFET switches are
integrated. For power supply,
depending on the required
power, a HS-NGS241A to HS-
NGS248 can be installed.
� 8 active controlled current outputs
� for the direct connection of proportional
magnetic valves
� LED control display
� up to two LP-DAP8T connectible to a HK-
DEA16N card
� combinable with other LP-DAPxx panels
� Short-circuit proof
Connection example of a proportional magnetic valve
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the Laboratory Reactor