04 - Laboratory Automation Hardware - HiTec Zang GmbH

44
Laboratory Automation Hardware
8 Digital Inputs with Sensor Power Supply (LP-DEP8A)
This panel has no pull-up
resistor like the LP-DEP8,
however it delivers extra 24 V
on every socket (-pin3) for the
supply of on available
� for limiting value
modulators with
electronics and digital
status signals
� one or two LP-DEP8A suitable for
connection to a HK-DEA16N/F card
� Inputs with NAMUR compliant turn-off levels
Technical Data
Connection example for proximity and fill level sensors
Signal NAMUR NE28 compliant input level and pin assignment
Connection type 3-pin socket 180 °, DIN 41524
Usable with HK-DEA16N
For the evaluation of Proximity sensors, switch contacts, fill level switches, push switches, digital status
signals of devices etc., Sensor feeding on pin 3
Delivery Scope Panel with holding bolts, cable for internal connection
Order Code Description
LP-DEP8A Digital input interface panel with active 24 V supply and sensor power supply
LZ-AKTUB Caps for tuchel sockets
For suitable connecting cables for sensors and monitors, see “Cables for instrumentation”.
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the Laboratory Reactor