04 - Laboratory Automation Hardware - HiTec Zang GmbH

30
Case Accessories
Laboratory Automation Hardware
Mounting Bracket (LZ-BEFW19)
The mounting brackets allow the installation into
19 inch cabinets.
Order Code Description
LZ-BEFW19 Mounting bracket for 19 inch cabinets
Handle Bars (LZ-GRIFFxx)
The various handle bars improve the handling, or, if
used as stands, guarantee the stable upright stand
of the devices.
Order Code Description
LZ-GRIFFLU Wing handle bars for LAB PIs
LZ-GRIFFRO Front handle bars for LAB PIs
LAB PI interfaces
The interfaces for the process are usually found on
the PI (LabManager and LabBox). Serial interfaces
and bus interfaces are an exception. These can be
provided on the PI and on the UI (See UI interfaces).
Which signal type accords to which sensor, actuator, or device?
The following table displays via which signal type the
different instrumentation components such as
sensors, actuators and laboratory devices
communicate and how they can be connected to the
LAB PIs.
.
The PI is equipped with interface panels with
standardized NAMUR compliant connections. There
are suitable panels for the connection of virtually all
actuators, sensors and devices present in the lab.
Many laboratory devices have several connections
for selection, for example analogue I/O or RS232.
As far as practical applications are concerned, the
analogue interfaces are more uncomplicated since
less modifications have to be carried out and a multimeter
suffices as a test apparatus, if one is required.
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the Laboratory Reactor