04 - Laboratory Automation Hardware - HiTec Zang GmbH

28
Laboratory Automation Hardware
LabManager2 Basis Device (LB-LABMAN2B)
The device is assembled with the offered interface cards and panel models and is equipped with the
available extra modules.
Extension Reserve
Reserve Can be equipped with
(1) Panel 1 all available panels
(2) Panel 2 all available panels
(3) Panel 3 all available panels
(4) Panel 4 all available panels
(5) Panel 5 all available panels
(6) Panel 6 all available panels
(7) Panel 7 all available panels
(8) Panel 8 all available panels
(9) Panel 9 all available panels
(10) Panel 10 all available panels
(11) Panel 11 all available panels
(12) Panel 12 all available panels
(13) Panel 13 all available panels
(14) SER1 HD-RS2329L, HD-
RS2329PL, HD-RS485P
(15) SER2 HD-RS2329L, HD-
RS2329PL, HD-RS485P
(18) internal 12 interface cards, sensor
/ actuator power supply
HS-NGS241A
HS-NGS248
Technical Data
Case 6 HE desktop units
Basis Panel Potential-free UI interface (PC), power supply and indication LEDs
CPU HK-CPU32 card, 32 bit Embedded Controller with watchdog, HK-SER8ECB card
Dimensions Depth: 370mm
Width: 450mm (19“)
Height: 280mm / 6HE
Extension Reserve See table
Working Temperature 0 to 50 °C, non-condensing
Storing Temperature 0 to 50 °C
IP Protection Category IP20, complies with EN61010 safety regulations for EMSR and laboratory device
Power Consumption 30 W to 1500 W, depending on the configuration (without 230 V switching outputs)
Operating Voltage 230 V +10, -20 %
Delivery Scope LabManager, cable for the connection to the 9-pin RS232 interface of the UI, 230
V cable, manual
Order Code Description
LB-LABMAN2B LabManager basis device for individual equipping
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the Laboratory Reactor