04 - Laboratory Automation Hardware - HiTec Zang GmbH

22
Laboratory Automation Hardware
Basis devices for individual supply
A basic device for individual mounting will be
equipped with interface cards and interface panels
according to your requirements.
LabBox1
basis device
(LB-LABBOX1B)
2 free panel places
LabBox2
basis device
(LB-LABBOX2B)
4 free panel places
LabManager1
basis device
(LB-LABMAN1B)
6 free panel places
LabManager2
basis device
(LB-LABMAN2B)
13 free panel places
Example of special
building:
LabManager3 basis
device (LABMAN3B)
20 free panel places
A LabManager PI is for exampleassembled as
follows:
� a basic device (LB-LABMAN1B),
� an analogue/digital converter card (HK-AD20N),
� a multiplexer card (HK-HMUX)
� two interface panels (for example LP-AEP8 & LP-
PTP8) as well as
� a UI, e.g. a CG-ABK1 with
� LabVision software.
This configuration includes eight universal potentialfree
analogue inputs and eight inputs for Pt100
temperature sensors and is suitable for monitoring
and data logging.
If the system is not supposed to be updated later, a
LabBox would be the more cost-efficient alternative.
If more than seven interface panels, including the
basis panel, are needed, it is necessary to use a
double height LabManager2. Seven more panel
places are available due to the additional height unit.
In case of even greater interface requirement,
several more devices can be run by one UI.
Common Features
All devices are equipped with a CPU32 card, a basis
panel and a power supply.
A power supply for sensors and actuators can
optionally be integrated into the devices in order to
obtain a compact and comprehensive automation
solution.
The corresponding UI LabVision software will also
be individually customised to your precise
requirements.
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the Laboratory Reactor