04 - Laboratory Automation Hardware - HiTec Zang GmbH
04 - Laboratory Automation Hardware - HiTec Zang GmbH
04 - Laboratory Automation Hardware - HiTec Zang GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
24<br />
<strong>Laboratory</strong> <strong>Automation</strong> <strong>Hardware</strong><br />
LabBox1 Basis Device (LB-LABBOX1B)<br />
Extension Reserve<br />
Reserve equipped with<br />
(1) panel 1 all available panels*<br />
(2) panel 2 all available panels*<br />
(3) SER 1 HD-RS2329L, HD-RS485P<br />
(4) SER 2 HD-RS2329L, HD-RS485P<br />
(5) SER 3 HD-RS2329L, HD-RS485P<br />
(6) SER 4 HD-RS2329L, HD-RS485P<br />
(7) internal<br />
2 interface cards plus HK-SER8ECB, sensor / actuator power supply with HS-<br />
NGS243<br />
* With the exception of PSER99 due to the installation depth of the interface modules RS2329L, RS2329PL and RS4859P<br />
Technical Data<br />
Case 3 HE desktop case<br />
Basis Panel UI interface (PC), 230 V~ connection and function LEDs<br />
CPU CPU32 card, 32 bit Embedded Controller with watchdog<br />
Extension Reserve See table<br />
Dimensions Depth: 310 mm<br />
Width: 236 mm<br />
Height: 145 mm (3 HE)<br />
Working Temperature 0 to 50 °C, non-condensing<br />
Storing Temperature 0 to 50 °C<br />
IP Protection Category IP20, complies with EN61010 safety regulations for EMSR and laboratory devices<br />
Power Consumption From 30 W to 140 W, depending on the configuration<br />
Operating Voltage 230 V +10, -20 %<br />
Delivery Scope LabBox1 basis device, cable for the connection to the 9-pin RS232 interface of<br />
the UI, 9-pin, 230 V cable, manual<br />
Order Code Description<br />
LB-LABBOX1B LabBox1 basis device for individual equipping<br />
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the <strong>Laboratory</strong> Reactor
Change language