04 - Laboratory Automation Hardware - HiTec Zang GmbH

38
Laboratory Automation Hardware
4 Analogue Inputs and 4 Pt100 Inputs (LP-AE4PT4P(A))
This panel respectively
combines four channels of the
panels LP-AEP8(A) and LP-
PTP8.
For connection information, see
LP-AEP8 and LP-PTP8.
For connection diagram, see
LP-AEP8(A) and LP-PTP8.
Technical Data
Signal 0/4 ... 20 mA, -10 ... +10 V and Pt100 resistance feeler
Connection type see LP-AEP8(A) and LP-PTP8
Usable with HK-HMUX, HK-AD20NMUX8, HK-AD20NMUX16
For the evaluation of Temperatures through Pt100 sensors,
Analogue signals such as mixer rotation speed & torque,
fill level, temperature output of a thermostat, pH value / RedOx on IL-PHAMP1
(external) etc.
Delivery Scope Panel with holding bolts, cable for internal connection
Order Code Description
LP-AE4PT4P Interface panel with 4 Pt100 and 4 voltage/current inputs
LP-AE4PT4PA Interface panel with 4 Pt100 and 4 voltage/current inputs
with 24 V = sensor power supply on free contacts
For further information see LP-AEP8(A) and LP-PTP8.
8 Thermocouple Inputs (LP-THP8)
This panel is suitable for the
connection of up to 8
thermocouples through a 2-pin
LEMO plug model 1S. The cold
� 8 inputs for thermocouples
(2-pin LEMO socket)
� Electronic cold junction
compensation
� Combination with other
analogue input panels
possible
The measured value is linearised
during the measurement and
converted to °C. The integrated cold junction
compensator corrects influences of the ambient
temperature. The resolution is better than 0,1 °C.
Technical Data
Signal For direct connection of thermocouples
Connection type 2-pin socket, model LEMO S1
Usable with HK-HMUX, HK-AD20NMUX8, HK-AD20NMUX16
For the evaluation of Temperatures through thermocouples
Connection example for the thermocouple interface
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the Laboratory Reactor