04 - Laboratory Automation Hardware - HiTec Zang GmbH
04 - Laboratory Automation Hardware - HiTec Zang GmbH
04 - Laboratory Automation Hardware - HiTec Zang GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
36<br />
<strong>Laboratory</strong> <strong>Automation</strong> <strong>Hardware</strong><br />
Delivery Scope Panel with holding bolts, cable for internal connection<br />
Order Code Description<br />
LP-AEP8A Interface panel with 8 current and voltage inputs, sensor power supply 24 V<br />
LZ-AKTUB Caps for tuchel Sockets<br />
Suitable connecting cables for laboratory devices and sensors:<br />
Order Code Description<br />
ZK-LAB-HI01-IA-UP-O-01 Analogue input cable with open ends for voltage<br />
ZK-LAB-HI01-IA-UA-O-01 Analogue input cable with open ends for voltage with feeding<br />
ZK-LAB-HI01-IA-IP-O-01 Analogue input cable with open ends for 0/4..20 mA twin conductor<br />
ZK-LAB-HI01-IA-IA-O-01 Analogue input cable with open ends for 0/4..20 mA twin conductor with feeding<br />
ZK-LAB-HI01-IA-IA-O-02 Analogue input cable with open ends for 0/4..20 mA four conductor with feeding<br />
For other cables, see "Cables for Instrumentation“.<br />
8 Pt100 Temperature Sensor Inputs (LP-PTP8)<br />
Up to 8 Pt100 or other<br />
resistance feelers can be<br />
connected directly to this panel.<br />
� 8 inputs for Pt100 and<br />
resistance feelers (4-pin<br />
LEMO socket model S1)<br />
� Combination with other<br />
analogue input panels<br />
possible<br />
The wire length does not have any influence on the<br />
measuring accuracy in the quadruple wire<br />
technique. The resolution is better than 0.01 °C<br />
The measured value delivered by the resistance<br />
feeler is linearised and converted to °C. The<br />
resolution depends on the interface cards used. The<br />
signals of the measuring sensor can be calibrated<br />
via the software.<br />
Technical Data<br />
Connection example for a PT 100 connection panel<br />
Signal Pt100 signal twin, triple and quadruple wiring connection<br />
Connection type 4-pin socket, model LEMO S1<br />
Usable with HK-AD20NMUX8, HK-AD20NMUX16, HK-HMUX<br />
For the evaluation of Temperatures through Pt100 sensors<br />
Delivery Scope Panel with holding bolts, cable for internal connection<br />
Order Code Description<br />
LP-PTP8 NAMUR compliant interface panel for Pt100 with twin to quadruple wire technology<br />
LZ-AKLES1 Caps for LEMO S1<br />
You can find customise temperature sensors ready for connection in "Process Analytics/Sensors"<br />
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the <strong>Laboratory</strong> Reactor
Change language