USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman

MOTOMAN ROBOTICS EUROPE
User’s manual Ladder Editor 32 Page: 47
Changing an edited ladder line
Created: 96-01-31 Revised: 01-04-05 Doc. name: Mrs55130-ch12.fm
12. Line operation of ladder diagram
Be sure to select [Line Alt] or [Line Insert] for the contents edited in the "ladder
editing" display before editing another line. Without this operation, the contents
edited immediately before will be deleted. Ladder Editor 32 checks the ladder
information that is being currently edited when another line appears. If the [Line
Alt] or [Line Insert] is not selected, an editing confirmation message appears.
(Refer to "Automatic updating function".)
Fig.39 [Confirmation] Dialog Box
Normally, the operator uses the menu or tool button to perform [Line Alt] or [Line
Insert].
12.1 Changing an edited ladder line
Overwrite the contents edited in the "ladder editing" display on the line currently
being edited, in the following manner.
How to operate
1) Select [Edit] – [Line control] – [Line Alt], or select from the main tool bar
(refer to "Main tool bar").
12.2 Inserting an Edited Ladder Line
Insert the contents edited in the "ladder editing" display into the next line of the
line currently being edited, in the following manner. Therefore, the ladder data
after the inserting line will be shifted backward.
How to operate
1) Select [Edit] – [Line control] – [Line Insert], or select from the main tool bar
(refer to "Main tool bar").