USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman

MOTOMAN ROBOTICS EUROPE
User’s manual Ladder Editor 32 Page: 61
Transferring Ladder Diagrams to a
Created: 96-01-31 Revised: 01-04-05 Doc. name: Mrs55130-ch16.fm
16. Transferring printing information to a text file
16.1 Transferring Ladder Diagrams to a Text File
Transfers an image of a ladder diagram to a text file.
[How to Operate]
Select [File] – [Output Text] – [Ladder Image] – [System Ladder (or User Ladder)].
16.2 Transferring Used Relay No. Lists to a Text File
Transfers the lists of relay Nos. used and the line Nos. referring to each relay No. to a
text file. The system section and the user section are transferred together in the list of
reference lines.
[How to Operate]
Select [File] – [Output Text] – [Relay No. use line list] – [System Ladder (or User Ladder)].
16.3 Transferring Used Register No. Lists to a Text File
Transfers the lists of register Nos. used and the line Nos. referring to each register No.
to a text file. The system section and the user section are transferred together in the
list of reference lines.
[How to Operate]
Select [File] – [Output Text] – [Register No. use line list] – [System Ladder (or User
Ladder)].
16.4 Transferring Relay No. Use State to a Text File
Transfers the relay number use state to the text file in a "matrix" display.
[How to Operate]
Select [File] – [Output Text] – [Relay No. use state].
16.5 Transferring User Alarms and User Messages to a Text File
Transfers the user alarms and user messages to a text file.
[How to Operate]
Select [File] - [Output text] - [User alarm message]