USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman
USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman
USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MOTOMAN ROBOTICS EUROPE<br />
User’s manual <strong>Ladder</strong> <strong>Editor</strong> <strong>32</strong> Page: 77<br />
<strong>Ladder</strong> Parts Set Value and refe-<br />
Created: 96-01-31 Revised: 01-04-05 Doc. name: Mrs55130-ch23.fm<br />
23. Cross reference function<br />
23.1 <strong>Ladder</strong> Parts Set Value and reference line list display<br />
function<br />
The ladder parts set value and reference line list display function displays on<br />
which line and for which ladder parts the specified set values are used.<br />
How to operate<br />
1) Select [View] – [Value Reference line list]. The dialog box shown<br />
in fig. appears.<br />
Fig.54 [Input Value] Dialog Box<br />
2) After inputting the targeted set value type and the value, click the [OK] button.<br />
The [Reference line list] dialog box appears.<br />
■ [Value] (Reference Data) List Box<br />
The list contains the set values to be searched for. Normally, there is only one<br />
item. However, since more than two items may appear occasionally, select one.<br />
■ [Parts] Tree<br />
Fig.55 [Reference Line List] Dialog Box<br />
The tree consists of ladder parts. Selecting this tree item can limit the line Nos.<br />
displayed in the [Reference line No.] matrix.<br />
For example, selecting "STR" item displays only the line Nos. with the set values<br />
for "STR" parts.