USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman
USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman
USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MOTOMAN ROBOTICS EUROPE<br />
User’s manual <strong>Ladder</strong> <strong>Editor</strong> <strong>32</strong> Page: 79<br />
Function to display the relay no. use<br />
Created: 96-01-31 Revised: 01-04-05 Doc. name: Mrs55130-ch23.fm<br />
23.2 Function to display the relay no. use state list<br />
This function displays which relay Nos. are used or not used in the ladder program<br />
that is being edited.<br />
How to operate<br />
1) Select [View] – [Relay No. use state list]. The dialog box shown in fig.<br />
appears.<br />
■ Use State Display Matrix<br />
Relay Nos. used are displayed in the following colors:<br />
Red : Used in a system ladder.<br />
Blue : Used in a user ladder.<br />
Purple : Used in both system and user ladders.<br />
In the matrix, the vertical axis displays the 10th or higher digits of the relay Nos. in<br />
units of 10, while the horizontal axis displays the 1st digit of the relay Nos.. Therefore,<br />
in the case of the use state display matrix in fig. the left top matrix is the relay<br />
No. 4007.<br />
Clicking the colored matrix displays the list of used line Nos. in the [Use Line No.]<br />
list box.<br />
■ [Start Number] Combo box<br />
The use state appears in the "use state display matrix" in units of 1000. Select the<br />
unit in the [Start Number] combo box.<br />
■ [Find Number] Input Box<br />
Fig.57 [Relay No. Use State List] Dialog Box<br />
Inputting the relay No. in this input box and clicking the [Find] button displays the<br />
specified relay No. in the matrix display.