USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman

MOTOMAN ROBOTICS EUROPE
User’s manual Ladder Editor 32 Page: 93
Description of menu
Created: 96-01-31 Revised: 01-04-09 Doc. name: Mrs55130-ch27.fm
27. Appendix
27.1 Description of menu
Menu Function Button
File -
New
Creates a new ladder program in default.
Open
Opens an existing ladder program.
Close
Save
Save As
Load relay name file
Save relay name
Closes the ladder program that is being edited.
Saves an overwritten ladder program in which compiling
after editing is completed successfully. To save
a ladder program that is being edited and cannot be
compiled, use [Option] – [Save tempolary file].
Select the storage file name to save the ladder program
in which compiling is completed successfully.
Reads in a name file for the ladder program that is
being edited.
Saves the relay name information.
Can be selected when a relay name is edited.
Print -
Ladder Image -
User Ladder
System Ladder
Prints ladder diagram images of the user ladder.
Prints ladder diagram images of the system ladder.
Relay No. use line list -
User Ladder
System Ladder
Prints the relay No. list used in the user ladder.
Prints the relay No. list used in the system ladder.
Register No. use line list -
User Ladder
System Ladder
Relay No. use state
User alarm User message
Prints the register No. list used in the user ladder.
Prints the register No. list used in the system ladder.
Prints the relay No. use state matrix.
Prints user alarms and user messages.
Preview -
Ladder Image -