Automatic sprinkler, water spray and deluge systems - RedBookLive

PART 3: SECTION 17.1
FIRE PUMPS
* These pumps are approved with impeller diameters within the ranges shown to provide flows and heads within these ranges
** The bypass flow rate is 5% of rated flow
The above pumps are approved with mechanical seals and fitted with Danfoss EVSI 15, Part No. 032U7190 or EVSI 20, Part No.
032U7191 'closed head' relief valves.
KSB Australia Pty. Limited
27 Indwe Street, Tottenham, Victoria 3012, Australia
Tel: +61 3 9314 0611 • Fax: +61 3 9314 7435
E-mail: ksbcentra@ksb.com.au • Website: www.ksb.com.au
Certificate No: 198a to LPS 1131: Issue 1
Fire Pump
Product
Name
Type
E100-26 Direct coupled
end suction
E100-20 Direct coupled
end suction
E80-20 Direct coupled
end suction
E65-20 Direct coupled
end suction
E65-16 Direct coupled
end suction
E50-20 Direct coupled
end suction
E50-16 Direct coupled
end suction
Suction Inlet
Diameter/
Discharge
Outlet Diameter
(mm)
Impeller
Diameter
(mm)
Rated
Speed
(rev/min)
Rated
Flow
(L/min)
(at NPSH
req .<
5.38m)
Rated
Head
(bar)
(at
NPSH
req.<
5.38m)
Closed
Valve Head
(bar)
LPCB
Ref. No.
125/100 230* 2950 4700 5.9 7.5 198a/01
205* 2950 3800 5 5.9
230 2950* 4700 5.9 7.5
230 1800* 3000 (1) 2.1(1) 2.8
125/100 214* 2950 4500 5.5 6.4 198a/02
175* 2950 3000 3.5 4.2
214 2950* 4500 5.5 6.4
214 1800* 2700 (1) 2.0 (1) 2.4
100/80 214* 2950 3800 5.4 6.5 198a/03
165* 2950 2800 2.5 3.7
214 2950* 3800 5.4 6.5
214 1800* 2350 (1) 1.9(1) 2.4
80/65 195* 2950 2500 3.5 5.4 198a/04
165* 2950 2100 2.3 3.8
195 2950* 2500 3.5 5.4
195 1800* 1800 1 2
80/65 174* 2930 2250 2.6 4.1 198a/05
125* 2930 1450 1.2 2
174 2930* 2250 2.6 4.1
174 1800* 1500 (1) 0.9(1) 1.6
65/50 214* 2930 1350 4.6 6.4 198a/06
165* 2930 1000 2.4 3.8
214 2930* 1350 4.6 6.4
214 1800* 850 1.6 2.4
65/50 174* 2930 1500 3.1 4.4 198a/07
135* 2930 1000 (1) 1.6(1) 2.5
174 2930* 1500 3.1 4.4
174 1800* 870 (1) 1.4(1) 1.7
* These pumps are approved with impeller diameters and speeds within the ranges shown, to provide flows and heads within the ranges
shown.
The above pumps are fitted with ‘closed head’ relief valve Part no. 5-70.1.
(The above pumps are approved with packed glands or mechanical seals.)
18 Jan 2014 153