Automatic sprinkler, water spray and deluge systems - RedBookLive

PART 3: SECTION 21.1
PLASTIC PIPES AND FITTINGS
Product Name Size Model Maximum LPCB Ref. No.
Working
Pressure
(bar)
1" 12
1¼" 12
1½" 12
2" 12
CPVC Union (Soc x Soc) ¾" V5033-E 12 878a/21
1" V5033-E 12
CPVC Union (Soc x Thd) w/ Brass End ¾" V5033-E-3 12
1" V5033-E-3 12
Grooved Coupling 1¼" V5001-G 12 878a/22
1½" V5001-G 12
2" V5001-G 12
2½" V5001-G 12
65mm x 2½" V5001-G 12
3" V5001-G 12
Notes relating to Viking Plastics fittings:
1) Viking Plastics Fittings are LPCB approved for use with Viking Plastics and Harvel LPCB approved pipes and Nibco FP-1000 “One-
Step Solvent Cement” adhesive.
2) Where assemblies are made using Harvel pipe, the system of pipe and fittings must be installed in accordance with Nibco Inc
Installation Instructions ( Nibco Ref: IM-BLZME-0608 dated 19/05/08). which includes LPCB Conditions of Use agreed with Nibco
3) Where assemblies are made using Viking pipe, the system of pipe and fittings must be installed in accordance with Nibco Inc
Installation Instructions (Nibco Ref: IM-BLZME-0608 dated 19/05/08) and Viking Plastics 'Blazemaster' Installation Instruction (Viking
Ref: VBM020107 Revision 4) which includes LPCB Conditions of Use agreed with Nibco and Viking
4) The maximum normal ambient temperature of use shall not exceed 50°C.
5) The products shall only be installed by LPCB Certificated or Registered installing companies (see Part 5, Section 1A and 1B above),
or by firms outside the UK who can provide evidence of personnel training in the installation of the product. It is recommended that
firms engaged in the installation of this product also be LPCB Certificated to ISO 9000.
6) Viking Plastics Blazemaster CPVC fittings are manufactured from Blazemaster CPVC materials that are WRAS listed.
7) Blazemaster® is a registered trademark of Lubrizol Advanced Materials, Inc.
184 18 Jan 2014