Automatic sprinkler, water spray and deluge systems - RedBookLive

PART 3: SECTION 3.1
WET AND DRY ALARM VALVES FOR SPRINKLER SYSTEMS
This section lists products approved in accordance with:
EN12259-2 Fixed firefighting systems. Components for sprinkler and water spray systems. Wet alarm
valve assemblies
EN12259-3 Fixed firefighting systems. Components for sprinkler and water spray systems. Dry alarm
valve assemblies
LPCB Schedule of requirements
It is strongly recommended that all alarm valves, dry-pipe valves and back-pressure valves be the subject of a
maintenance contract, satisfying the requirements of the LPC Rules for Automatic Sprinkler Installations.
The nominal orifice size of valves listed is given in millimetres.
The products shall be installed and maintained in accordance with the manufacturer's instructions.
Globe Fire Sprinkler Corporation
4077 Air Park Drive, Standish, Michigan 48658, USA
Tel: +1 989 846 4583 • Fax: +1 989 846 9231
E-mail: brian@globesprinkler.com • Website: www.globesprinkler.com
Certificate No: 147b
Product Name Model Sizes
LPCB Ref. No.
(mm)
Globe Alarm Valve vertical H1 100 (1) , 150 (1) 147b/01
H3 100 (2) , 150 (2) 147b/02
Notes:
1) Maximum working pressure 20 bar.
2) Maximum working pressure 12 bar.
GW Sprinkler A/S
Kastanievej 15, DK-5620 Glamsbjerg, Denmark
Tel: +45 64 72 2055 • Fax: +45 64 72 2255
E-mail: sales.dep@gwsprinkler.com
Certificate No: 084c
Product Name Model Sizes
LPCB Ref. No.
(mm)
GW Alarm Valve (1) (4) (6) C1 80 , 100, 150 & 200 084c/02
GW Alarm Valve (2) (3) (6) (7) C1 100 & 150
GW Alarm Valves (1) (5) C (HT aluminium bronze) 100 084c/04
Notes:
1) With flanged inlet and flanged outlet.
2) With flanged inlet and grooved outlet.
3) Maximum working pressure of 12.5 bar.
4) Maximum working pressure of 16 bar.
5) Maximum working pressure of 20 bar.
6) Approved with standard seat or with ‘S’ seat.
32 18 Jan 2014