Automatic sprinkler, water spray and deluge systems - RedBookLive

PART 3: SECTION 3.1
WET AND DRY ALARM VALVES FOR SPRINKLER SYSTEMS
Venus Fire Protection Ltd
4105, Portland Blvd, Sherbrooke (Quebec) J1L 1X9, Canada
Tel: +1 819 820 8000 • Fax: +1 819 820 8002
E-mail: venus@venus.ca • Website: www.venus-fire.com
Certificate No: 638a to EN 12259-2:1999 + Amendment A1:2001 & Amendment A2: 2005
Wet Alarm Valve
Product Name Model Sizes
LPCB Ref. No.
(mm)
Wet Alarm Valve B 80, 100, 150, 200 (1, 2, 3, 4) 638a/01
D 100, 150, 200 (1, 2, 3, 5) 638a/02
E 100, 150, (1, 2, 3, 6) 638a/03
Notes:
1) Approved for use in vertical mounting position only.
2) Maximum working pressure 12 bar.
3) Approved for use with and without Model E Retard Chamber.
4) With flanged inlet and flanged outlet.
5) With flanged inlet and grooved outlet.
6) With grooved inlet and grooved outlet.
Victaulic Company
4901 Kesslersville Road, Easton, Pennsylvania 18040, USA
Tel: +1 610 559 3300 • Fax: +1 610 250 8817
E-mail: victaulic@victaulic.com • Website: www.victaulic.com
Certificate No: 104c to EN 12259-3
Series 768
Product Name Model Sizes
LPCB Ref. No.
(mm)
Series 768 Dry Alarm Valve Series 40, 50, 65, 80, 100, 150 & 200 104c/01
Notes:
1) Maximum working pressure: 20 bar.
2) Approved for use with and without Victaulic Series 746 LPA accelerator.
3) Approved with grooved inlet and outlet only.
4) Approved in vertical orientation only.
5) Installations containing Series 768 valve shall be maintained under servicing contracts with the manufacturer, or LPS 1048 and LPS
1050 firms experienced in the installation and servicing of this valve.
Certificate No: 104e to EN 12259-2
Series 751
Product Name Model Sizes LPCB Ref. No.
Series 751 Wet Alarm Valve Series 751 80, 100, 150 & 200 104e/01
Notes:
1) Maximum working pressure: 16 bar
2) Approved for use with and without Series 752 retard chamber.
3) Approved with grooved inlet and outlet only.
4) Approved in vertical orientation only.
5) 150mm nominal diameter valve approved in 165.1mm and 168.3mm outside diameters.
6) Installations containing Series 751 valve shall be maintained under servicing contracts with the manufacturer, or LPS 1048 and LPS
1050 firms experienced in the installation and servicing of this valve.
36 18 Jan 2014