GPTLR SERIES (2008 Release) - Maxon
GPTLR SERIES (2008 Release) - Maxon
GPTLR SERIES (2008 Release) - Maxon
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
STEP 1 - WELD LIFTGATE TO VEHICLE - Continued<br />
7. Weld the top of extension plate to vehicle body sill as shown in FIG. 16-1.<br />
2” LG<br />
EQUALLY SPACED BE-<br />
TWEEN 5” LG. WELDS<br />
1/4”<br />
CAUTION<br />
When using electrical welder to weld on extension plate, make sure the welder<br />
ground lead is connected directly to the extension plate, as close as possible<br />
to the place being welded. Failure to comply can result in damaged cylinders<br />
and electrical parts.<br />
NOTE: While welding extension plate to vehicle body sill, make sure the diamond<br />
plate surface on the extension plate stays fl ush with the sill.<br />
1/4”<br />
5” LG, 3 PLACES<br />
CENTER OVER WIDTH OF<br />
3 TUBES<br />
EXTENSION PLATE WELDS - VIEWED FROM ABOVE<br />
(FORKLIFT NOT SHOWN)<br />
FIG. 16-1<br />
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713<br />
16