GPTLR SERIES (2008 Release) - Maxon
GPTLR SERIES (2008 Release) - Maxon
GPTLR SERIES (2008 Release) - Maxon
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
STEP 14 - ADJUST UNDERRIDE (IF REQUIRED)<br />
NOTE: The following adjustment is for:<br />
• <strong>GPTLR</strong>-25 & <strong>GPTLR</strong>-33 with optional underride<br />
• <strong>GPTLR</strong>-44 & <strong>GPTLR</strong>-55 with standard underride<br />
1. Stow the Liftgate under hydraulic<br />
pressure (FIG. 45-1).<br />
NOTE: The bed height dimensions for<br />
each hole shown below apply to<br />
an unloaded vehicle.<br />
2. Measure vehicle bed height (FIG. 45-2A).<br />
Look for the hole on each underride bracket<br />
that matches your bed height (FIG. 45-2B).<br />
If underride is already bolted with the holes<br />
for your bed height, go to instruction 8 and do<br />
the FINE ADJUSTMENT.<br />
48”-50”<br />
47”<br />
51” - 52”<br />
53” - 54”<br />
55”<br />
ACCESS<br />
HOLE<br />
LIFTGATE WITH PLATFORM STOWED<br />
(<strong>GPTLR</strong>-44 OR <strong>GPTLR</strong>-55 STANDARD<br />
UNDERRIDE SHOWN)<br />
FIG. 45-1<br />
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713<br />
46”<br />
BED HEIGHT<br />
(UNLOADED)<br />
UNDERRIDE<br />
LIFT ARM<br />
UNDERRIDE BRACKET SETTINGS BASED<br />
ON BED HEIGHT (RH BRACKET SHOWN)<br />
FIG. 45-2B<br />
<strong>GPTLR</strong>-44 OR <strong>GPTLR</strong>-55<br />
STANDARD UNDERRIDE<br />
FIG. 45-2A<br />
45
Change language