GPTLR SERIES (2008 Release) - Maxon
GPTLR SERIES (2008 Release) - Maxon
GPTLR SERIES (2008 Release) - Maxon
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
STEP 7 - REMOVE LOCKING BRACKETS<br />
1. Push the control switch to RAISE position<br />
to moderately pressurize hydraulic<br />
system. Remove tack weld from installation<br />
bracket (FIG. 25-1B). Next, unbolt<br />
installation bracket (FIG. 25-1B) from<br />
RH side of extension plate (FIG. 25-<br />
1A). Repeat for LH side.<br />
WARNING<br />
!<br />
To prevent possible injury, never work in the area under the platform. Get access<br />
to the locking angle from the back of the Liftgate.<br />
NOTE: To operate Liftgate, locking bracket must be removed.<br />
2. Remove clamps from forklift and<br />
Liftgate. If wood supports were<br />
used between forklift and ICC<br />
bumper, remove the supports.<br />
Back out forklift (FIG. 25-2).<br />
FIG. 25-1A<br />
FLAT<br />
WASHER<br />
INSTALLATION<br />
BRACKET<br />
NUT<br />
FIG. 25-1B<br />
TOP OF<br />
EXTENSION<br />
PLATE<br />
TACK<br />
WELD<br />
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713<br />
25<br />
FIG. 25-2