Workbench Release History
Workbench Release History
Workbench Release History
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Aarhus <strong>Workbench</strong> release history<br />
25.04.2012 4.0.1.713<br />
WS 71<br />
20.04.2012 4.0.1.712<br />
WS 71<br />
correctly.<br />
New feature<br />
The resistivity in the layer intersected by the DOI (upper or<br />
lower) can now be extracted in 'Visualize data or Inversions'.<br />
The Theme is found on the DOI tab.<br />
Corrected bugs<br />
Added support for millisecond time stamp precision in SPS<br />
files<br />
Fix in the export data and models functionality: no more<br />
issue when the node names have capital letters<br />
New Features<br />
Now the DOI values are exported in the inv-files.<br />
A number of new processing settings have been added for<br />
airborne TEM data. This is<br />
o A separate set of trapeze filter width can be specified<br />
and applied to data above a given flight height.<br />
o A new slope filter for average data work from a<br />
given time and towards EARLY times. This is to<br />
delete early time data which has a non physical<br />
behavior. The filter is useful for e.g. VTEM data.<br />
Corrected bugs<br />
Updated 32 bit version of em1dinv which resolves certain<br />
SCI stability issues for large problems. However, we still<br />
highly recommend using the 64 bit version whenever<br />
possible.<br />
A few bugs have been fixed in the upgrade procedure for the<br />
map, and the procedure has been optimized to run a lot<br />
faster.<br />
A memory leek when creating themes has been eliminated.<br />
Always close theme form before gridding, especially if the<br />
workspace is large!<br />
Small issues with transparency and bitmaps have been<br />
resolved.<br />
Resolved model edition related GERDA reporting issue. The<br />
GERDA error "ORA-00001: unique constraint<br />
(GERDA_OWNER.XAKGER$MODELEDITION_IDENT)<br />
" is resolved by performing a new export with this release of<br />
the Aarhus <strong>Workbench</strong><br />
Improvement of inversion log stability<br />
Now the DOI lines on DBQ layers on profiles are initialized<br />
correct for new users<br />
The profile unit is now set correctly for new users<br />
The inversion is now by standard performed in dbdt as it<br />
allows data to be negative at early times correcting for coil<br />
response. A check has been added in the filtering procedures<br />
so that data are now always checked for negative signs<br />
according to the setting for the average sign filter.<br />
- 13 -
Change language