Workbench Release History
Workbench Release History
Workbench Release History
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Aarhus <strong>Workbench</strong> release history<br />
14.07.2010 3.3.10.608<br />
WS 58<br />
29.06.2010 3.3.9.606<br />
WS 58<br />
21.06.2010 3.3.8.605<br />
WS 58<br />
17.06.2010 3.3.7.604<br />
WS 58<br />
14.06.2010 3.3.6.603<br />
WS 55<br />
<br />
<br />
<br />
Bitmap properties have been re-implemented for Grid<br />
settings.<br />
When updating a SSV node with boreholes,<br />
DisableML1...DisabelML6 is set to 'No' and 'Lock AC' is set<br />
to 'No' for new boreholes.<br />
The Export functionality, now exports a new file with DOI<br />
info (only if DOI is present)<br />
Corrected bugs<br />
Missing sections error in SCEMBI has been fixed<br />
Not any longer writing to C:\Temp<br />
Corrected bugs<br />
Now the plotting of models with different number of layers<br />
on a profile is working.<br />
Added model plot to EMBI<br />
If the buffer zone is shown on the GIS map, when the profile<br />
layer is deleted, the buffer zone now disappears from the<br />
GIS map. Before it was hanging, and could not be deleted.<br />
Minimum and maximum altitudes are now imposed in the<br />
processing system to avoid altitudes going out of range.<br />
Recommended interval is [5 .. 80] m<br />
"All tem files with time stamp later then February 22, 2010<br />
are now written out and modelling with gate open/close<br />
times. This implies that the gate opening and gate width<br />
times are correct in the geo-file"<br />
New Features<br />
<br />
<br />
It is now possible to omit a number of gates before inversion<br />
of SkyTEM data. The data are not deleted in the processing<br />
system, but omitted from the data prepared for inversion.<br />
Now DOI (Depth of Investigation) can be made as elevation<br />
in the 'Visualize data and inversions'<br />
Corrected bugs<br />
SCI: Run two configuration file problem corrected<br />
New Features<br />
It is now possible to add a bitmap image to a profile. It can<br />
e.g. be a seismic bitmap<br />
Corrected bugs<br />
SCI con files: some parameters have been changed for DOI<br />
and forward response con files.<br />
Relative path: relative path are now used for configuration<br />
files and inversion.<br />
Batch gridding : combo box selection issue fixed<br />
SCI properties : display of all SCI node properties<br />
New Features<br />
Now it is possible to add interpolated bars to a profile. Use<br />
Add DBQ and select interpolated bars<br />
New functionality on the profile form: Show other profiles<br />
from a drop down, or use arrows to switch to the profile<br />
- 31 -
Change language