Workbench Release History

Aarhus Workbench release history
03.11.2009 3.2.60.587 Maintenance Release
30.10.2009 3.2.59.586 Maintenance Release
30.10.2009 3.2.59.585 Maintenance Release
8. The altitude measured by the GPS is now read from the SPS file,
saved to GERDA and processed using the GPS processor settings.
Furthermore, it is displayed in the SkyTEM edit window under the
GPS item. Here it can be shown as either GPS altitude or GPS
elevation.
9. Fixed a bug, that sometimes made 'Visualize data or inversions' for
e.g. altitude not work properly.
10. It is now possible to run only the processing algorithms on only one
SkyTEM channel at a time.
11. A new feature in the SkyTEM processing s system enables the user to
rerun the processors and keep the raw data processing.
12. A new functionality has been added enabling the user to easy apply a
standard deviation (STD) to SkyTEM raw normalized data. The STD is
dependent on the signal level and it is specified as a function of
software channel number and gate number.
The new functionality will be released in the forth coming Workbench
service release.
13. Current was not calculated when using narrow averring for SLM and
LM.
14. The inversion system can now be loaded directly from a DBQ node.
This is extremely useful when used together with the now model
importer for evaluation of inversions carried out in third party software
like EMFlow.
15. The new color scale editor has been disabled due to compatibility
problems.
Bugfixes
1. The topography is now by default calculated from the difference
between the GPS measured altitude and the laser measured altitude.
The laser altitude is based on pitch and tilt corrected altitudes
averaged over all lasers and located to the center of the frame. The
topography is overwritten if a topography grid is added at a later stage
in the processing sequence.
2. Fixed a bug, that sometimes made 'Visualize data or inversions' for
e.g. altitude not work properly
Bugfixes
1. Fixed a bug that would sometimes cause the Workbench to freeze
when loading models or indexing a new SCI.
2. A bug where embi reports that the emo file from the inversion program
is incomplete, has been fixed. The bug is caused by the new compiler
used to compile the inversion program
Bugfixes
1. When determine the minimum number of gates for a sounding only in
gates which are in use after the average filters are counted. Minimum
number of gates per sounding
2. Strange error message, Danish XP (Out of disk space was translated
to: Printeren løbet tør for papir)
3. For single layer model, blind last layer is skipped.
4. SkyTEM aps delivers often skb files which have the Moment.ini
version set to 1 even though the version should be 2. The importer
now wraps this by forcing the version number to 2 if the skb is created
in 2009 or later.
5. Several bugs in the implementation of the new 2nd order filters have
- 36 -