Workbench Release History

Aarhus Workbench release history
Depth of investigation (DOI)
User friendly control of DOI settings.
DOI plotted as elevation instead of depths.
Batch gridding
It is now possible to grid in a batch directly from the DBQ and this
new feature can really save time for you.
The user can select a number of themes and select common settings
to use for creating bitmaps for the selected themes.
Inverting for BIAS response in TEM data is now possible but it not
documented and you should wait using this feature until a future
release.
New themes in “visualize data or inversion’s”
Resistivity STD
Thickness STD
Depth STD
flight altitude STD
Inverted bias STD on tab sheet STD
Inverted bias on tab sheet System (former Pitch Roll tab
sheet)
Corrected bugs
All setting on the "Model Position Explore Settings" form
are now saved in the registration database.
When exporting as XYZ file, the format of the STD values
are changed from 0.xx to 1.xx. Furthermore thickness for all
layers have been added.
Standard constraints for smooth and few layer inversion
setup added for SCI-inversions. Auto calculation of log.
layer distribution for start model added for SCI-inversions.
SkyTEM import: In case of more than 1000 errors in one
line file the log for this line file is truncated so only 1000
errors is shown. An information line is appended.
The selected models in the model position explorer form are
now plotted correctly on the GIS map, also when there two
models at the same position/time.
Pressing cancel Layer Control forced a GIS redraw.
Problems with color scale engine has been solved: Negative
intervals, settings in engine, interval length.
Adding topography from a DBQ node failed if the models
were imported without data in the general model importer.
The visualization of 2D inversion models and pseudo
sections: The triangulation check box had no effect, this has
been corrected.
Fixed a bug that sometimes occurred when adding
topography from Surfer grid files (list index out of bounds).
- 33 -