Workbench Release History
Workbench Release History
Workbench Release History
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Aarhus <strong>Workbench</strong> release history<br />
used e.g. for temp files during inversion<br />
Go to > file\preferences..\workspace<br />
The GPS positions can now be shifted in the flight direction<br />
in order to shift the positions to the focus point of the<br />
transmitter-receiver coils (which is close to the receiver<br />
coil). The shift is given in the GPS processor<br />
New right click menu facility to insert or remove colors on<br />
RGB colors in the colorscale wizard<br />
Corrected bugs<br />
When defining the processing settings for raw data, it is<br />
checked that the trapez filter is set to On. The user can still<br />
ignore the warning and use straight averages.<br />
A check for gate center times between open and close gate<br />
has been added to the geometry file reader.<br />
Adding a tab file which is a "collection" of tab files to a<br />
layer did sometimes giving an error preventing the<br />
workspace to open. This has been fixed<br />
When the transmitter altitude is not defined the altitude is set<br />
to a user specified default value. The offset between the<br />
transmitter and the receiver as specified in the geometry file<br />
is now added to the default value<br />
"Hanging" curves in the SkyTEM processing systems is now<br />
avoided by deselecting a sounding points before moving the<br />
buffer etc<br />
Data can now be processed without pitch and roll<br />
information, either because there are not such information or<br />
the device number is set to None in the processing control<br />
window<br />
When the GPS location is re-located to the receiver coil<br />
location for SkyTEM data, a check has been added to ensure<br />
that the correction is only done when the GPS position<br />
changes by more than 0.01 meter per second<br />
SCI Wizard: some issues fixed when loading a settings file<br />
on the last wizard page<br />
SCI Wizard: random issue with unique key violation fixed<br />
SCI Inversion: delete datasets issues between run 1 and run 2<br />
and after the run 2 fixed : all tables are now correctly<br />
cleared.<br />
Batch gridding and gridding: issue with coordinates fixed<br />
Batch gridding: size of the area can be changed again<br />
07.02.2011 3.3.13.619 Corrected bugs<br />
Batch gridding: Size of selection is now fixed, the max size<br />
of the DB query is set up and the search radius is correctly<br />
applied. (No more increasing values).<br />
SCI Wizard: fix of load settings function and fast settings<br />
mode.<br />
Add a-priori from grid or lines:<br />
Added a check for positive values for depth,<br />
- 26 -
Change language