Workbench Release History

Aarhus Workbench release history
visualizations directly in the Workbench.
Inversion
1. The inversion job form is now general for all data types.
2. A resubmit option has been added to the “View Inversion Result”
window. It is possible to fully or partially resubmit an inversion.
When resubmitting changes can be made to the starting model or
different constraints can be applied.
3. Data points can now be deleted for a resubmission based on the
difference between the observed data and inverted data.
SkyTEM inversion
1. Altitudes and angles can now be visualized in the “View Inversion
Result” on the Inversion Explorer and on the Section Window. It is
possible to see both the starting values for the inversion as well as
the output values from the inversion.
2. A special constraint can now be defined on the Inversion Job
window for the combined inversion of x-data and z-data.
Bug Fixes SkyTEM
1. If the altitude for the transmiter is undefined (it is standing on the
ground) the transmitter and receiver altitudes are set to the values
defined in the geometry file.
2. If the altitude of the receiver coil is larger than the altitude of the
tranmsitter coil (the receiver is below the transmitter) the altitude
of the transmitter is moved downward by half the altitude diffrence
between the two coils. This prevents the receiver coil to move
down in the first layer when using Semdi for inversion. This
change does not apply when the inversion is done in the
Workbench
3. The width of the trapez filters has been increased by a factor of
two so the width given under the processing settings is the full
width - not the half-width. All filter widths already stored in the
GERDA database are automatically recaluclated when a
processing node is activated.
4. All Key fields in the SkyTEM list fields are upgraded so the Key is
no longer a string but an integer (stored in a character field). The
upgrade is done automatically when a SkyTEM processing node
is activated.
5. The correction factor is now applied independent of the altitude -
i.e. the factor is always applied.
6. Changed the default values in the SkyTEM processing so they fit
the recommended settings.
7. SkyTEM data points can now be deleted from the Sounding plots
8. Exception handling for cleaning up the Workspace and memory
has been implemented if an error occurs during basic processing
of SkyTEM data.
9. The progress counter is now reset before writing the tem files for a
particular software channel.
10. An error in the SkyTEM geometry loader causing the number of
devices to be wrong has been fixed
Other bug fixes
1. The performance for updating points on the map from e.g. the
inversion module or the CVES module has been dramitically
increased.
2. Added search function to the “Create DBQ from Inversion Jobs"
window. Also fixed a bug that would cause an exception on
clicking OK with no items selected. Made the form height
adjustable.
- 57 -