Responder LE Model 5701 Security and Remote Start Installation ...

Optional sensor port - 4-pin connector
Note: There is a shock sensor built onboard the main unit.
This connector is an optional sensor port to add sensors to the security system.
Optional sensors that may be used are: 508D Doubleguard Proximity Field Disturbance,
509U Ultrasonic Sensor, 506T Glass Break Sensor, and 507M Digital Tilt
Sensor.
This input can also be used for a second 504D Doubleguard Shock Sensor, or for
additional pin and magnetic switches.
Alarm trigger inputs shorter than 0.8 seconds will trigger the WarnAway response,
while inputs longer than 0.8 seconds will trigger the Full Alarm sequence.
Note: You will need to add a 4-pin plug to interface with any hardwired switches.
52
© 2008 Directed Electronics—all rights reserved