Responder LE Model 5701 Security and Remote Start Installation ...

To access another feature in the same menu:
1. Press and release the Valet/Program switch the number of times necessary
to advance from the feature you just programmed to the next one you want
to program.
2. Then press the Valet/Program switch once more and hold it.
For example, if you just programmed the third feature in the menu and you want
to program the seventh feature in the menu, press and release the Valet/Program
switch four times and then press it once more and hold it. The siren will chirp
seven times to confirm access to the seventh feature.
To select another menu:
1.
2.
Press and hold the Valet/Program switch.
After three seconds, the unit will advance to the next menu and the siren
will chirp, indicating which menu has been accessed.
For example, if you just programmed some features in the first menu and you
want to program a feature in the third menu, press and hold the Valet/Program
switch. After three seconds, the siren chirps twice indicating access to the second
menu. Continue to hold the button and three seconds later the siren will
chirp three times indicating access to the third menu. Features in the third menu
are then programmable following steps 4 through 6 of the System Features Learn
Routine procedure.
The learn routine is exited if any of the following occurs:
• The open door is closed
• The ignition is turned On
• There is no activity for 30 seconds
• The Valet/Program switch is pressed too many times
62
© 2008 Directed Electronics—all rights reserved