MW810 Mobile Workstation User Guide - Motorola Solutions

1. Press the power button on the front panel of the CPU Box
or Display- both buttons perform identical function.
2. Wait for the boot process to start and for Windows desktop
to appear.
NOTE: The MW810 Mobile Workstation can be configured to
start by pressing the:
• Vehicle ignition switch
• CPU power button
• Display power button
The workstation can also start using a combined operations
of the items described above with selectable time-delay. For
more information, refer to Motorola Solutions MW810
Mobile Workstation, R2.0, Administrator Guide P/N
6802988C42.
Shutting Down the Computer
When you finish a working session, you can stop the computer
by turning off the power or leaving the computer in
Sleep or Hibernation mode.
Turning Off
Use the Windows OS Shut Down dialog box to turn off the
MW810 Mobile Workstation.
NOTE: The MW810 Mobile Workstation can be configured so
that the vehicle ignition switch, the power button located on
the CPU front panel, or the Display power button can turn it
off.
!
Caution
Remember to save important information before
turning off your workstation.
Be aware, that rapid turning off and on can damage
your Hard Disk Drive. If you need to turn the MW810
Mobile Workstation on immediately after turning it
off, always wait for the shut down process to
complete.
For more on turning Off, see “Power Off” on page 29.
5