MW810 Mobile Workstation User Guide - Motorola Solutions
MW810 Mobile Workstation User Guide - Motorola Solutions
MW810 Mobile Workstation User Guide - Motorola Solutions
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1 Power Inlet<br />
12V/24V power inlet from the vehicle battery system.<br />
2 USB Ports<br />
Three USB 2.0 ports with up to 500mA load per port.<br />
!<br />
Caution<br />
To avoid injury when driving, remove all unsecured<br />
USB devices from the USB ports of the display.<br />
To secure connection to USB devices, use USB<br />
Extender Cable (FKN8800A).<br />
USB ports 1 and 2 are used for connection of external USB<br />
devices.<br />
USB port 3 is normally used to connect the <strong>MW810</strong> <strong>Mobile</strong><br />
<strong>Workstation</strong> keyboard. The port receptacle has two threaded<br />
bosses for securing the USB connector.<br />
NOTE: Be aware that USB devices connected to the USB port<br />
should be compliant with the operating system. Otherwise<br />
the system does not operate properly.<br />
Keep unused USB ports of the display unit sealed by using<br />
the rubber plugs attached to the display.<br />
3 CPU-to-Display Cable Receptacle<br />
Signal cable 60 pin receptacle for connecting the display to<br />
the CPU Box.<br />
The cable connector is secured to the display by two screws.<br />
4 Mounting Screw Holes<br />
Four M4 threaded screw holes for securing the display to a<br />
mount.<br />
5 Bluetooth Antenna<br />
Bluetooth V2.1 plus Enhanced Data Rate (EDR) Module and<br />
antenna, mounted under the top cover of the display<br />
(optional).<br />
19