Hardware Interface Description - Wireless Data Modules

More documents

Recommendations

Info

MC55/56 Hardware Interface Description Confidential / Released s Function Signal name IO Signal form and level Comments SIM interface CCIN I R I ≈ 100kΩ V IL max = 0.5V V IH min = 2.15V at I = 20µA, V IH max=3.3V at I = 30µA CCRST O R O ≈47Ω V OL max = 0.25V at I = 1mA V OH min = 2.3V at I = -1mA V OH max = 2.73V CCIO I/O R I ≈10kΩ V IL max = 0.5V V IH min = 1.95V, V IH max=3.3V R O ≈220Ω V OL max = 0.4V at I = 1mA V OH min = 2.15V at I = -1mA V OH min = 2.55V at I = -20µA V OH max = 2.96V CCCLK O R O ≈220Ω V OL max = 0.4V at I = 1mA V OH min = 2.15V at I = -1mA V OH max = 2.73V CCVCC O R O max = 5Ω CCVCCmin = 2.84V, CCVCCmax = 2.96V Imax = -20mA CCGND Ground CCIN = high, SIM card holder closed (no card recognition) Maximum cable length 200mm to SIM card holder. All signals of SIM interface are protected against ESD with a special diode array. Usage of CCGND is mandatory. ASC0 interface /RXD0 /TXD0 /CTS0 /RTS0 /DTR0 /DCD0 /DSR0 O I O I I O O V OL max = 0.2V at I = 1mA V OH min = 2.35V at I = -1mA V OH max = 2.73V V IL max = 0.5V V IH min = 1.95V, V IH max=3.3V /DTR0, RTS0: Imax = -90µA at V IN = 0V /TXD0: Imax = -30µA at V IN = 0V First serial interface for AT commands or data stream. To avoid floating if output pins are high-impedance, use pull-up resistors tied to VDD or pull-down resistors tied to GND. See Chapter 3.3.2.1. If unused keep pins open. /RING0 O ASC1 interface /RXD1 /TXD1 /CTS1 /RTS1 O I O I V OL max = 0.2V at I = 1mA V OH min = 2.35V at I = -1mA V OH max = 2.73V V IL max = 0.5V V IH min = 1.95V, V IH max=3.3V I I max = -90µA at V IN = 0V Second serial interface for AT commands. To avoid floating if output pins are high-impedance, use pull-up resistors tied to VDD or pull-down resistors tied to GND. See Chapter 3.3.2.1. If unused keep pins open. Digital audio interface RFSDAI RXDDAI SCLK I I I V OL max = 0.2V at I = 1mA V OH min = 2.35V at I = -1mA V OH max = 2.73V If unused keep pins open. TFSDAI TXDDAI O O V IL max = 0.5V V IH min = 1.95V, V IH max=3.3V I I max = 330µA at V IN = 3.3V MC55/56_hd_v02.06 Page 78 of 105 29.10.2004
MC55/56 Hardware Interface Description Confidential / Released s Function Signal name IO Signal form and level Comments Analog audio EPP2 O V O max = 3.7Vpp The audio output is interfaces See also Table 30. balanced and can directly EPN2 O operate an earpiece. If unused keep pins open. Explanation of signal names: P = positive, N = negative EPP1 EPN1 MICP1 MICN1 MICP2 MICN2 AGND O O I I I I V O max = 3.7Vpp See also Table 30. R I ≈ 50kΩ differential V I max = 1.03Vpp See also Table 31. R I = 2kΩ differential V I max = 1.03Vpp See also Table 31. Balanced audio output. Can be used to directly operate an earpiece. If unused keep pins open. Balanced microphone input. To be decoupled with 2 capacitors (C K = 100nF), if connected to a microphone or another device. If unused keep pins open. Balanced microphone input. Can be used to directly feed an active microphone. If used for another signal source, e.g. op amp, to be decoupled with capacitors. If unused keep pins open. Separate ground connection for external audio circuits. MC55/56_hd_v02.06 Page 79 of 105 29.10.2004
Page 1 and 2:
MC55/56 Hardware Interface Descript
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28: MC55/56 Hardware Interface Descript
Page 77: MC55/56 Hardware Interface Descript
Page 105: MC55/56 Hardware Interface Descript
show all

Hardware Interface Description - Wireless Data Modules

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?