Hardware Interface Description - Wireless Data Modules
Hardware Interface Description - Wireless Data Modules
Hardware Interface Description - Wireless Data Modules
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MC55/56 <strong>Hardware</strong> <strong>Interface</strong> <strong>Description</strong><br />
Confidential / Released<br />
s<br />
5.5.5 Voiceband transmit path<br />
Test conditions:<br />
• The values specified below were tested to 1kHz and 0dB gain stage, unless otherwise<br />
stated.<br />
• Parameter setup: Audio mode = 5 for MICP1 to MICN1 and 6 for MICP2 to MICN2,<br />
inBbcGain= 0, inCalibrate = 32767, outBbcGain = 0, OutCalibrate = 16384, sideTone = 0<br />
Table 31: Voiceband transmit path<br />
Parameter Min Typ Max Unit Test condition/Remark<br />
Input voltage (peak to peak)<br />
MICP1 to MICN1, MICP2 to<br />
MICN2<br />
Input amplifier gain in 6dB steps<br />
(inBbcGain)<br />
1.03 V<br />
0 42 dB Set with AT^SNFI<br />
Fine scaling by DSP (inCalibrate) -∞ 0 dB Set with AT^SNFI<br />
Input impedance MIC1 50 kΩ<br />
Input impedance MIC2 2.0 kΩ<br />
Microphone supply voltage ON<br />
Ri = 4kΩ (MIC2 only)<br />
Microphone supply voltage OFF;<br />
Ri = 4kΩ (MIC2 only)<br />
Microphone supply in POWER<br />
DOWN mode<br />
2.57<br />
2.17<br />
1.77<br />
2.65<br />
2.25<br />
1.85<br />
2.73<br />
2.33<br />
1.93<br />
V<br />
V<br />
V<br />
0 V<br />
no supply current<br />
@ 100µA<br />
@ 200µA<br />
See Figure 17<br />
MC55/56_hd_v02.06 Page 90 of 105 29.10.2004