GEA CAIRfricostar - Aspectenvironmental.com

GEA CAIRfricostar
Electrical Integration
Overview of Cable Connections
GEA CAIRfricostar circulating air units
NOTE!
Only the unit wiring diagram provides exact information about the unit delivery condition.
The switch cabinet is supplied loose!
*
11
10
2
1
4
8
5 5 5
6
9
7
Fig. 4: Overview of cable connections of the GEA CAIRfricostar circulating air units
1: Pool water thermostat (option); 3 x 1,5 mm²
2: Reheater valve 5 x 1,5 mm²
3: Switch cabinet
4: Power supply; 3~ 400 V+N+PE/ 50 Hz
5: System cable fully assembled (press and attach plugs)
6: Exhaust air fan (option); 5 x 1,5
7: Pool water pump connection (option); 3 x 1,5 mm²
8: Remote control/humidistat; 5 x 0,75 mm²
9: Reheater pump; 3 x 1,5 mm²
*Special model for Austria:
It is usually not necessary to screen the sensor supply line!
1: Pool immersion temperature sensor 2 x 0,75 mm²
2: Reheater valve 5 x 1,5 mm²
3: Switch cabinet
4: On-site BMS connections provided by others according to wiring diagram
5: Fully assembled system cable is not necessary (standard in switch cabinet)
6: Power supply 3 x 400 V+N+PE/ 50 Hz
7: Pool water pump connection (option); 3 x 1,5 mm²
8: Reheater pump; 3 x 1,5 mm²
9: External safety switch off only on request
10: Inlet temperature sensor, heater 2 x 0,75 mm²
11: Room temperature and humidity sensor 5 x 0,75 mm²
PR-2008-0327-GB • Subject to modifications • Status 05/2009 55