CD1230/CD1240/CD1250 (basic) - Gabbey Business Machines

Preparation before Use
Connecting Cables
Connecting LAN Cable (Optional)
Follow the steps below to connect a LAN cable to the machine.
1
When the machine is powered, first press the Power key on the operation
panel. Check that the Power indicator and the memory indicator are off.
After this, turn off the main power switch.
Check that the indicator
is off.
2
Connect a LAN cable to the network interface located on right side of the
body.
3
Connect the other end of the cable to HUB.
4
Configure the network. For details, refer to Configuring Network (LAN
Cable Connection) on page 2-10.
OPERATION GUIDE 2-5