Bill Acceptor
Bill Acceptor
Bill Acceptor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CHAPTER 7<br />
Optional Recycler Unit (RC-10)<br />
7-3. Specifications<br />
7-3-1. Technical Specifications<br />
Recycler Note *1<br />
Recycler Capacity *2<br />
Processing Speed<br />
Interface<br />
LED<br />
*1 The following bills are not accepted as recycler bill.<br />
- Damaged bills<br />
- Dog-eared bills<br />
- Too soft bills<br />
- Shorter bills<br />
*2 The following condition may change the maximum number of recycler bills.<br />
- Operation Temperature is under -5 o C.<br />
- Operation Humidity is under +30%RH.<br />
- When the retry operation occurs depending on the condition of the bills at the stacking<br />
time.<br />
7-3-2. Environmental Specifications<br />
$1US or $5US<br />
10 Notes (Max.)<br />
Approx. 4 Seconds (from the bill insertion to stacking completion)<br />
Approx. 4 Seconds(All processes from the bill dispensing beginning to completion)<br />
MDB Interface (Protocol:Coin Hopper)<br />
Display LED (Green)<br />
Operation Temperature *1<br />
Storage Temperature<br />
Operation Humidity *1<br />
Storage Humidity<br />
Light Disturbance<br />
Installation<br />
-15 o C to 60 o C<br />
-20 o C to 60 o C<br />
+15% to +95%RH (no condensing)<br />
+15% to +95%RH (no condensing)<br />
Direct sunlight shall be avoided.<br />
Indoor and Outdoor(not exposed to wind and weather)<br />
*1 Be sure to satisfy the following temperature humidity conditions.<br />
Additional Range<br />
Range of operation<br />
temperature/humidity<br />
Additional Range<br />
7 - 4
Change language