Bill Acceptor
Bill Acceptor
Bill Acceptor
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CHAPTER 7<br />
Optional Recycler Unit (RC-10)<br />
7-8-4. Changing Motor Board and Motor Unit<br />
1) Remove the tapping bis (M2.6 x 6) that is holding<br />
the R Base Cover B.<br />
2) Remove the R Base Cover sliding in the arrow<br />
direction.<br />
Tapping Bis<br />
R Base Cover B<br />
3) Disconnect two connectors on the FULL-EM<br />
board.<br />
4) Remove two tapping bises (M2.6 x 6) and<br />
remove the FULL-EM board.<br />
Tapping Bises<br />
Connectors<br />
RULL-EMP Board<br />
5) Remove two tapping bises (M2.6 x 6) that is<br />
holding the motor unit.<br />
6) Remove the motor unit sliding in the arrow<br />
direction.<br />
<br />
<br />
<br />
<br />
7 - 20
Change language