Bill Acceptor
Bill Acceptor
Bill Acceptor
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CHAPTER 4 Trouble Shooting and Diagnostics<br />
4-3-3. Stacker Test<br />
This detects the stacker condition. When the test starts, the pushing mechanism is working constantly.<br />
When no LED lights, it means the stacker is working properly. When the red and yellow LEDs light, refer<br />
to Stacker Test Error Code shown below and detects the error.<br />
1 2 3 4 5 6 7 8<br />
ON<br />
Stacker Error Code<br />
Conditon<br />
LED Stakcer Condition Causes and Solution<br />
R Y G<br />
Normal -<br />
1 Stacker Full<br />
Check the cash box. Check all harnesses and connectors.<br />
Change the MAG/CPU board if required. Refer to Chapter 3.<br />
Disassembly Instructions.<br />
Check all harnesses and connector. CPU/Feed small board<br />
2 Stacker JAM/Lock<br />
failure may occur. Change the CPU/Feed small board if required.<br />
Stacker Motor may be corrupted. Change the motor if required.<br />
Refer to Chapter 3. Disassembly Instructions.<br />
Set the cash box properly.Check all harness and connectors.<br />
10 Box is not set MAG/CPU board failure may occur. Change the MAG/CPU<br />
board if required.<br />
4 - 8
Change language