Blackfly - CYLOD

More documents

Recommendations

Info

Point Grey Blackfly Technical Reference 7 Image Acquisition Control 7 Image Acquisition Control 7.1 Asynchronous Triggering The camera supports asynchronous triggering, which allows the start of exposure (shutter) to be initiated by an external electrical source (hardware trigger) or camera register write (software trigger). Model All All Blackfly Supported Trigger Modes Mode Trigger Mode 0 (“Standard External Trigger Mode”) Trigger Mode 15 (“Multi-Shot Trigger Mode”) 7.1.1 GenICam Acquisition Control AcquisitionMode AcquisitionStart AcquisitionStop AcquisitionFrameCount AcquisitionFrameRate Name Display Name Description Value AcquisitionFrameRateControlEnabled FrameRateAuto TriggerSelector TriggerMode TriggerSource Acquisition Mode Acquisition Start Acquisition Stop Acquisition Frame Count Acquisition Frame Rate (Hz) Acquisition Frame Rate Control Enabled Frame Rate Auto Trigger Selector Trigger Mode Trigger Source Sets the acquisition mode of the device Starts the acquisition of the device Stops the acquisition of the device at the end of the current frame Number of frames to acquire in Multi Frame acquisition mode Controls the acquisition rate (in Hertz) at which the frames are captured Enables manual control of the camera frame rate Controls the mode for automatic frame rate adjustment Selects the type of trigger to configure Controls whether or not the selected trigger is active Specifies the internal signal or physical input line to use as the trigger source. The selected trigger must have its Trigger Mode set to On. Continuous Single Frame Multi Frame Write Only Write Only True False Off Continuous Exposure Start/ Exposure Active Off On Software Line x where x is a GPIO trigger pin Revised 12/13/2012 Copyright ©2012 Point Grey Research Inc. 34
Point Grey Blackfly Technical Reference 7 Image Acquisition Control TriggerActivation TriggerDelay TriggerDelayEnabled ExposureMode ExposureTime ExposureAuto Name Display Name Description Value Trigger Activation TriggerDelay (us) Trigger Delay Enabled Exposure Mode ExposureTime (us) Exposure Auto Specifies the activation mode of the trigger Specifies the delay (in microseconds) to apply after the trigger reception before activating it Specifies whether or not the Trigger Delay is enabled Sets the operation mode of the exposure (shutter) Exposure time in microseconds when Exposure Mode is Timed Sets the automatic exposure mode when Exposure mode is Timed Falling Edge Rising Edge True False Timed Trigger Width Off Once Continuous Revised 12/13/2012 Copyright ©2012 Point Grey Research Inc. 35
Page 1 and 2: Blackfly PoE Digital Camera Technic
Page 3 and 4: Point Grey Blackfly Technical Refer
Page 45: Point Grey Blackfly Technical Refer
Page 97 and 98:
Point Grey Blackfly Technical Refer
Page 99 and 100:
Page 101 and 102:
Page 103:
show all

Blackfly - CYLOD

Create successful ePaper yourself

Delete template?

Save as template?