You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Point Grey <strong>Blackfly</strong> Technical Reference<br />
Appendix A: GenICam Features<br />
A.4 Acquisition Control<br />
AcquisitionMode<br />
AcquisitionStart<br />
AcquisitionStop<br />
AcquisitionFrameCount<br />
AcquisitionFrameRate<br />
Name Display Name Description Value<br />
AcquisitionFrameRateControlEnabled<br />
FrameRateAuto<br />
TriggerSelector<br />
TriggerMode<br />
TriggerSource<br />
TriggerActivation<br />
TriggerDelay<br />
TriggerDelayEnabled<br />
ExposureMode<br />
ExposureTime<br />
ExposureAuto<br />
Acquisition Mode<br />
Acquisition Start<br />
Acquisition Stop<br />
Acquisition Frame Count<br />
Acquisition Frame Rate (Hz)<br />
Acquisition Frame Rate<br />
Control Enabled<br />
Frame Rate Auto<br />
Trigger Selector<br />
Trigger Mode<br />
Trigger Source<br />
Trigger Activation<br />
TriggerDelay (us)<br />
Trigger Delay Enabled<br />
Exposure Mode<br />
ExposureTime (us)<br />
Exposure Auto<br />
Sets the acquisition mode of the<br />
device<br />
Starts the acquisition of the<br />
device<br />
Stops the acquisition of the<br />
device at the end of the current<br />
frame<br />
Number of frames to acquire in<br />
Multi Frame acquisition mode<br />
Controls the acquisition rate (in<br />
Hertz) at which the frames are<br />
captured<br />
Enables manual control of the<br />
camera frame rate<br />
Controls the mode for automatic<br />
frame rate adjustment<br />
Selects the type of trigger to<br />
configure<br />
Controls whether or not the<br />
selected trigger is active<br />
Specifies the internal signal or<br />
physical input line to use as the<br />
trigger source. The selected<br />
trigger must have its Trigger<br />
Mode set to On.<br />
Specifies the activation mode of<br />
the trigger<br />
Specifies the delay (in<br />
microseconds) to apply after the<br />
trigger reception before<br />
activating it<br />
Specifies whether or not the<br />
Trigger Delay is enabled<br />
Sets the operation mode of the<br />
exposure (shutter)<br />
Exposure time in microseconds<br />
when Exposure Mode is Timed<br />
Sets the automatic exposure<br />
mode when Exposure mode is<br />
Timed<br />
Continuous<br />
Single Frame<br />
Multi Frame<br />
Write Only<br />
Write Only<br />
True<br />
False<br />
Off<br />
Continuous<br />
Exposure Start/<br />
Exposure Active<br />
Off<br />
On<br />
Software<br />
Line x where x is<br />
a GPIO trigger pin<br />
Falling Edge<br />
Rising Edge<br />
True<br />
False<br />
Timed<br />
Trigger Width<br />
Off<br />
Once<br />
Continuous<br />
Revised 12/13/2012<br />
Copyright ©2012 Point Grey Research Inc.<br />
68