You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Point Grey <strong>Blackfly</strong> Technical Reference<br />
Appendix C: Control and Status Registers<br />
Field Bit Description<br />
Trigger_Mode [12-15]<br />
[16-19] Reserved<br />
Trigger mode (Trigger_Mode_0..15): used to set the trigger mode to be used. For more<br />
information, see Asynchronous Triggering on page 34.<br />
Query the Trigger_Mode_Inq fields of the TRIGGER_INQ register for available trigger modes.<br />
Parameter [20-31] Parameter for trigger function, if required (optional)<br />
C.7 AE_ROI: 1A70 – 1A74h<br />
To calculate the base address for an offset CSR:<br />
1. Query the offset inquiry register.<br />
2. Multiple the value by 4. (The value is a 32-bit offset.)<br />
3. Remove the 0xF prefix from the result. (i.e., F70000h becomes 70000h)<br />
Format:<br />
Offset Name Field Bit Description<br />
1A70h<br />
AE_ROI_CTRL<br />
Presence_Inq [0]<br />
ON_OFF [6]<br />
[1-5] Reserved<br />
[7-31] Reserved<br />
Presence of this feature<br />
0:Not Available, 1: Available<br />
Read: read a status<br />
Write: ON or OFF for this feature<br />
0: OFF, 1: ON<br />
If this bit = 0, other fields will be read only<br />
1A74h AE_ROI_OFFSET [0-31] 32-bit offset for the AE_ROI CSRs<br />
Base + 0h AE_ROI_UNIT_POSITION_INQ<br />
Base + 4h<br />
Base + 8h<br />
Base + Ch<br />
AE_ROI_UNIT_SIZE_INQ<br />
AE_ROI_POSITION<br />
AE_ROI_SIZE<br />
Hposunit [0-15] Horizontal units for position<br />
Vposunit [16-31] Vertical units for position<br />
Hunit [0-15] Horizontal units for size<br />
Vunit [16-31] Vertical units for size<br />
Left [0-15] Left position of ROI<br />
Top [16-31] Top position of ROI<br />
Width [0-15] Width of ROI<br />
Height [16-31] Height of ROI<br />
Revised 12/13/2012<br />
Copyright ©2012 Point Grey Research Inc.<br />
86