MC75 AT Command Set

MC75 AT Command Set
10.1 AT^SICS
s
(str)
Supported authentication mode values in for value "authMode". Changing
the will restore the password to its default ("").
“none“
[“PAP“]
“CHAP“
“MsChapV1“
10.1.1 Example: Default values of a CSD connection profile
As stated earlier, the "conType" selected with AT^SICS determines all other matching profile parameters related
to this "conType". Once "conType" is set in a new profile, the default values of all other related parameters are
assumed. To view the default settings you can use the read command AT^SICS?.
at^sics=1,conType,CSD
OK
at^sics?
^SICS: 0, "conType", ""
^SICS: 1, "conType", "CSD"
^SICS: 1, "alphabet", "0"
^SICS: 1, "user", ""
^SICS: 1, "passwd", ""
^SICS: 1, "authMode", "PAP"
^SICS: 1, "inactTO", "0"
^SICS: 1, "calledNum", ""
^SICS: 1, "dataRate", "1"
^SICS: 1, "dataType", "1"
^SICS: 2, "conType", ""
^SICS: 3, "conType", ""
^SICS: 4, "conType", ""
^SICS: 5, "conType", ""
OK
Select connection type CSD, identified by 1
Query current profiles.
Profile with 0 is still empty.
The new CSD profile just created is indicated with all
related parameters set to their default.
Character set determined with AT+CSCS applies
when string parameters are input with AT^SICS.
No user name set.
No password set.
Authentication protocol PAP is assumed as default.
No inactivity timeout set.
No destination set.
Data rate set to 9.6 kbaud.
Remote device is analog, e.g. an analog modem.
Profile with 2 is still empty.
Profile with 3 is still empty.
Profile with 4 is still empty.
Profile with 5 is still empty.
10.1.2 Example: GPRS connection profile
at^sics=0,conType,GPRS0
OK
AT^SICS=0,inactTO,"0"
OK
AT^SICS=0,dns1,"193.254.160.1"
OK
AT^SICS=0,authMode,"PAP"
OK
AT^SICS=0,passwd,t-d1
OK
Select connection type GPRS0.
Inactivitiy timeout = 0 (default).
IP address of Primary DNS server.
Authentication protocol PAP (default).
Password for GPRS services provided by the German
operator T-D1.
MC75_ATC_V01.001 Page 234 of 475 6/2/05
Confidential / Released