MC75 AT Command Set

MC75 AT Command Set
15.1 AT^SSTA
s
Parameter Description
(num)
MC75 Remote-SAT interface states
0 RESET
1 OFF
2 IDLE
3 PAC
4 WAIT
(num)
0 GSM character set
Input of a character requests one byte, e.g. "Y".
1 UCS2
To display the 16 bit value of characters represented in UCS2 alphabet a 4 byte
string is required, e.g. "0059" is coding the character "Y". For details please
refer to ISO/IEC 10646.
(num)
0 SAT is already used on another instance (logical channel in case of the multiplex
protocol). Only test and read commands can be used.
1 SAT may be started on this instance via the write version of this command.
(str)
SAT profile according to GSM 11.14 [22].
The profile tells the SIM Application which features (e.g. proactive commands) are supported by the SIM Application
Toolkit implementation of the MC75.
(num)
1 Activate Remote-SAT
Note
• To limit the time Remote-SAT is kept in states PAC or WAIT any ongoing (but unanswered) Proactive Command
is automatically aborted after 10 minutes with Terminal Response "ME currently unable to process command"
or "No response from user" if applicable. An URC "Terminate Proactive Command" will be send to the
external application in this case, too.
MC75_ATC_V01.001 Page 368 of 475 6/2/05
Confidential / Released