MC75 AT Command Set

MC75 AT Command Set
10.2 AT^SISS
s
10.2 AT^SISS Internet Service Setup Profile
AT^SISS serves to set up the necessary parameters in the Internet service profiles. Any service profile can then
be used to control a data link in conjunction with AT^SISO, AT^SISC, AT^SISR and AT^SISW.
The AT^SISS read command requests the current settings of all Internet service profiles. One line is issued for
every possible parameter of a given "srvType" value.
The AT^SISS write command specifies the parameters for a service profile identified by . At
first the type of Internet service needs to be selected via value "srvType". This determines the
applicability of all other values related to this "srvType" and sets their defaults. An exception is
the which can be set before or after selecting "srvType". To change the settings
the write command needs to be executed for each single .
All profile parameters set with AT^SISS are volatile. Therefore, the best practice is to use scripts and let the host
application handle the required AT commands.
The list below shows which parameters apply to each Internet service and which of them are
mandatory or optional.
1. "Socket"
- "address" (mandatory)
- "conId" (mandatory)
Internet connection profile.
- "alphabet" (optional)
2. "FTP"
- "address" (mandatory)
- "conId" (mandatory)
Internet connection profile.
- "alphabet" (optional)
3. "HTTP"
- "user" (optional)
- "passwd" (optional)
- "address" (mandatory)
- "conId" (mandatory)
Internet connection profile.
- "alphabet" (optional)
- "hcContent" (optional)
- "hcContLen" (optional)
- "hcUsrAgent" (optional)
- "hcMethod" (mandatory)
- "hcProp" (optional)
- "hcRedir" (optional)
- "hcAuth" (optional)
4. "SMTP"
- "user" (optional)
User name to be used for SMTP authentication.
- "passwd" (optional)
Password to be used for SMTP authentication.
- "address" (mandatory)
SMTP server address.
- "tcpPort" (optional)
TCP port number of SMTP Server.
MC75_ATC_V01.001 Page 236 of 475 6/2/05
Confidential / Released