MC75 AT Command Set

MC75 AT Command Set
11.16 AT^SGCONF
s
11.16 AT^SGCONF Configuration of GPRS related Parameters
Syntax
Test Command
AT^SGCONF=?
Response(s)
^SGCONF: (list of supported s), (list of supported s), (list of
supported es), (list of supported es)
OK
Read Command
AT^SGCONF?
Response(s)
^SGCONF: , , ,
OK
Write Command
AT^SGCONF=[][, [][, [][, []]]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge Last
SIEMENS ! % % % % % % ! % !
Parameter Description
(num)
The maximum number of octets in an information field of Unnumbered (U) frames.
0 no negotiation with network (500 will be used)
140...1520 (P) lower values diminish performance
(num)
The maximum number of octets in an information field of Combined Information (I) frames.
0 no negotiation with network (500 will be used)
140...1520 (P) lower values diminish performance
(num)
GPRS Multislot Class. The parameter can be changed only when the MT is detached, otherwise ''CME ERROR:
operation temporary not allowed'' will be returned. The value can be one of the classes indicated with the Test
command. The value set is volatileand powerup value is the maximum allowed.
(num)
EGPRS Multislot Class. The parameter can be changed only when the MT is detached, otherwise ''CME
ERROR: operation temporary not allowed'' will be returned. The value can be one of the classes indicated with
the Test command. The value set is volatile and powerup value is the maximum allowed.
MC75_ATC_V01.001 Page 297 of 475 6/2/05
Confidential / Released