MC75 AT Command Set

MC75 AT Command Set
11.12 AT+CGREG
s
11.12 AT+CGREG GPRS network registration status
The write command controls the presentation of an unsolicited result code "+CGREG: " when =1 and
there is a change in the MT's GPRS network registration status, or unsolicited result code "+CGREG: ,
, " when =2 and there is a change of the network cell.
The read command returns the status of result code presentation and an integer which shows whether
the network has currently indicated the registration of the MT. Location information elements and
are returned only when =2 and MT is registered in the network.
Syntax
Test Command
AT+CGREG=?
Response(s)
+CGREG: (list of supported s)
OK
Read Command
AT+CGREG?
Response(s)
+CGREG: , [, , ]
OK
Write Command
AT+CGREG=[]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge Last
GSM 07.07 % % % % % % % ! % !
Unsolicited Result Codes
URC 1
+CGREG:
Indicates a change in the MT's GPRS network registration status.
URC 2
+CGREG: , ,
Indicates a change in the MT's GPRS network registration status a change of the network cell including location
information.
Parameter Description
(num)
0 (P) Disable network registration unsolicited result code
1 Enable network registration unsolicited result code "+CGREG: "
2 Enable network registration unsolicited result code "+CGREG: , ,
"
MC75_ATC_V01.001 Page 291 of 475 6/2/05
Confidential / Released