28.04.2015 Views

MC75 AT Command Set

MC75 AT Command Set

MC75 AT Command Set

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>MC75</strong> <strong>AT</strong> <strong>Command</strong> <strong>Set</strong><br />

12. FAX <strong>Command</strong>s s<br />

12. FAX <strong>Command</strong>s<br />

The following commands can be used for FAX transmission. If the ME is acting as a Fax modem for a PC based<br />

application (e.g. "WinFax") it is necessary to select the proper Service Class (Fax Class) provided by the ME.<br />

The ME reports its Service Class capabilities, both the current setting and the range of services available. This<br />

is provided by the <strong>AT</strong>+FCLASS command.<br />

Service Classes supported by the ME:<br />

<strong>AT</strong>+FCLASS Parameter Service class Reference, Standard<br />

0 Data modem e.g. TIA/EIA-602 or ITU V.250<br />

1 Service Class 1 EIA/TIA-578-A<br />

12.1 FAX parameters<br />

Parameter Description<br />

(num)<br />

Modulation mode<br />

24 V.27ter - 2400 bps<br />

48 V.27ter - 7200 bps<br />

72 V.29 - 7200 bps<br />

96 V.29 - 9600 bps<br />

Note<br />

• Only the default value needs to be implemented. Use the test commands to check which parameter values<br />

are really possible.<br />

<strong>MC75</strong>_<strong>AT</strong>C_V01.001 Page 307 of 475 6/2/05<br />

Confidential / Released

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!